111126 - RONSEAL HIGH PERFORMANCE WOOD FILLERSAFETY DATA SHEET RONSEAL HIGH PERFORMANCE WOOD FILLER 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY: PRODUCT NAME: SYNONYMS, TRADE NAMES: APPLICATIONS: SUPPLIER:
Ronseal Ltd. Thorncliffe Park,Chapeltown,Sheffield, S35 2YP
Tel +44 (0) 114 246 7171 Fax +44 (0) 114 245 5629
2. COMPOSITION/INFORMATION ON INGREDIENTS: EINECS Nr.: CLASSIFICATION
The Full Text for all R-Phrases are Displayed in Section 16
3. HAZARDS IDENTIFICATION:
FILLER: Flammable and Harmful. CATALYST: Oxidising and Irritant. 4. FIRST AID MEASURES: GENERAL:
In all cases of doubt, or when symptoms persist, seek medical attention. Nevergive anything by mouth to an unconscious person. 111126 - RONSEAL HIGH PERFORMANCE WOOD FILLERINHALATION:
Remove to fresh air, keep the patient warm and at rest. If breathing has stoppedadminister artificial respiration. Give nothing by mouth. If unconscious, place in therecovery position and seek medical advice. INGESTION:
If accidentally swallowed obtain immediate medical attention. Keep at rest. DoNOT induce vomiting.
Remove contaminated clothing. Wash skin thoroughly with soap and water, or usea proprietary skin cleanser. Do NOT use solvents or thinners. Seek medical adviceif any irritation persists.
Contact lenses should be removed. Irrigate copiously with clean, fresh water for atleast 10 minutes, holding the eyelids apart, and seek medical advice. 5. FIRE FIGHTING MEASURES: EXTINGUISHING MEDIA:
Fire can be extinguished using: alcohol resistant foam, carbon dioxide (CO2),powder, water spray/ mist. Do not use water jet. SPECIAL FIRE FIGHTING PROCEDURES:
Fire will produce dense black smoke containing hazardous products of combustion(see Section 10). Exposure to decomposition products may be hazardous to health. Appropriate self-contained breathing apparatus may be required. Cool closedcontainers exposed to fire with water spray. Do not allow run-off from fire fightingto enter drains or watercourses. 6. ACCIDENTAL RELEASE MEASURES: SPILL CLEANUP METHODS:
Exclude sources of ignition and ventilate the area. Exclude non-essential personnel. Avoid breathing vapours. Refer to protective measures listed in Section 7 and 8. Contain and collect spillage and place in a suitable container for disposal inaccordance with the waste regulations (see Section 13). Clean preferably with adetergent; avoid the use of solvents. If the product enters drains or sewers,immediately contact the local water company; in the case of contamination ofstreams, rivers or lakes, the relevant environment agency. 7. HANDLING AND STORAGE: USAGE PRECAUTIONS:
Vapours are heavier than air and may spread along floors. They may formexplosive mixtures with air. Prevent the creation of flammable or explosiveconcentrations of vapour in air and avoid vapour concentrations higher than theoccupational exposure limits. Keep away from heat, sparks and open flame. Non-sparking tools should be used. Smoking, eating and drinking should beprohibited in areas of storage and use. Avoid skin and eye contact. Avoid inhalationof vapour. For Occupational Exposure Controls, refer to Section 8. The Manual Handling Operations Regulations may apply to the handling ofcontainers/packages of this product. STORAGE PRECAUTIONS:
Observe the label precautions. Store between 5°C and 25°C. Keep in a cool, dry,well ventilated place, away from sources of heat, ignition and direct sunlight. Nosmoking. Store separately from oxidising agents and strongly alkaline and stronglyacidic materials.
111126 - RONSEAL HIGH PERFORMANCE WOOD FILLER
The principles contained in the HSE Guidance Note: Storage of PackagedDangerous Substances, should be observed when storing this product. To avoid the risk of spillage, always store and transport in a secure and uprightposition. 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION: INGREDIENT NAME: LT EXP 8 Hrs ST EXP 15 Min INGREDIENT COMMENTS:
OEL's are taken from the current version of EH40 except those marked 'SUP',which are assigned by the supplier of the substance. MEL = Maximum ExposureLimit. VENTILATION:
Provide adequate ventilation. Where reasonably practicable, this should beachieved by the use of local exhaust ventilation and good general extraction. Ifthese are not sufficient to maintain concentrations of particulates and/or solventvapours below the relevant occupational exposure limits, suitable respiratoryprotective equipment should be worn. RESPIRATORS:
If exposure to hazardous substances identified above cannot be controlled by theprovision of local exhaust ventilation and good general extraction, suitablerespiratory protective equipment should be worn. PROTECTIVE GLOVES:
When skin exposure may occur, advice should be sought from glove suppliers onappropriate types. Barrier creams may help to protect exposed areas of skin butare not substitutes for full physical protection. They should not be applied onceexposure has occurred. EYE PROTECTION:
Eye protection designed to protect against liquid splashes should be worn. OTHER PROTECTION:
Cotton or cotton/synthetic overalls or coveralls are normally suitable. Grosslycontaminated clothing should be removed and the skin washed with soap and wateror a proprietary skin cleaner. Do not use solvents or thinners as skin cleaningagents. All personal protective equipment, including respiratory protective equipment, usedto control exposure to hazardous substances must be selected to meet therequirements of the COSHH Regulations. 9. PHYSICAL AND CHEMICAL PROPERTIES: APPEARANCE:
Colour will vary dependent on individual shade. ODOUR/TASTE: SOLUBILITY DESCRIPTION: FLASH POINT (°C): 111126 - RONSEAL HIGH PERFORMANCE WOOD FILLER 10. STABILITY AND REACTIVITY: STABILITY:
Stable if stored under recommended storage and handling conditions. CONDITIONS TO AVOID:
Keep away from oxidising agents and strongly alkaline and strongly acidic materialsto prevent the possibility of exothermic reaction. HAZARDOUS DECOMP. PRODUCTS:
In a fire, hazardous decomposition products such as smoke, carbon monoxide,carbon dioxide and alcohols may be produced. 11. TOXICOLOGICAL INFORMATION: TOXICOLOGICAL INFORMATION:
There is no data available on the product itself. The product has been assessedfollowing the conventional method in CHIP and is classified for toxicologicalhazards accordingly. This takes into account, where known, delayed and immediateeffects and also chronic effects from components from short-term and long-termexposure by oral, inhalation and dermal routes of exposure and eye contact. SeeSections 3 and 15 for details of the resulting hazard classification. Exposure to organic solvent vapours in excess of the stated occupational exposurelimit may result in adverse health effects such as irritation of the mucousmembrane and the respiratory system and adverse effects on the kidney, liverand central nervous systems. Symptoms and signs include headache, dizziness,fatigue, muscular weakness, drowsiness and in extreme cases loss ofconsciousness. Repeated or prolonged contact with the product may lead to removal of natural fatsfrom the skin resulting in non-allergic contact dermatitis and absorption through theskin. Splashes in the eyes may cause irritation and reversible local damage. Solvents may cause some of the above effects by absorption through the skin. 12. ECOLOGICAL INFORMATION: ECOLOGICAL INFORMATION:
The product has been assessed following the conventional method in CHIP and isnot classified as dangerous for the environment. DEGRADABILITY:
There is no data available on the product itself. ACUTE FISH TOXICITY:
There is no data available on the product itself. WATER HAZARD CLASSIFICATION:
The product should not be allowed to enter drains or watercourses, or be depositedwhere it can affect ground or surface waters. 111126 - RONSEAL HIGH PERFORMANCE WOOD FILLER 13. DISPOSAL CONSIDERATIONS: DISPOSAL METHODS:
Do not allow into drains or watercourses, or dispose of where ground or surfacewaters may be affected. Wastes, including emptied containers, are controlledwastes and should be disposed of in accordance with regulations made under theControl of Pollution Act and the Environmental Protection Act. Using informationprovided in this data sheet, advice should be obtained from the Waste RegulationAuthority whether the Special Waste Regulations apply. 14. TRANSPORT INFORMATION: GENERAL:
Transport within user's premises: always transport in closed containers that areupright and secure. Ensure that person's transporting the product know what to doin an accident or spillage. Polyester Resin Kit, UN 3269, only refers to Limited Quantity packages. [Fillerbase 5litres maximum; Peroxide 125ml liquid or 500g solid maximum] Refer toPacking Instruction P302. UN No. ROAD: ADR CLASS No.: PROPER SHIPPING NAME I: UN No. SEA: IMDG CLASS: IMDG PACK GR.: MARINE POLLUTANT: 15. REGULATORY INFORMATION: LABEL FOR SUPPLY: RISK PHRASES:
R-10 Flammable. R-20 Harmful by inhalation. R-36/38 Irritating to eyes and skin.
S-2 Keep out of reach of children. S-23 Do not breathe gas/fumes/vapour/spray.
111126 - RONSEAL HIGH PERFORMANCE WOOD FILLER
S-24/25 Avoid contact with skin and eyes. S-26 In case of contact with eyes, rinse immediately with plenty of water and seekmedical advice. S-46 If swallowed seek medical advice immediately and show this container label. S-51 Use only in well ventilated areas.
UK REGULATORY REFERENCES:
The information contained in this safety data sheet does not constitute the user'sown assessment of workplace risks as required by other health and safetylegislation. The provisions of the Health and Safety at Work etc. Act and theControl of Substances Hazardous to Health Regulations apply to the use of thisproduct at work. The Manual Handling Operations Regulations The Chemicals (Hazard Information and Packaging for Supply) Regulations 2002 :CHIP 3 The Carriage of Dangerous Goods (Classification, Packaging and Labelling) andUse of Transportable Pressure Receptacles Regulations. The Merchant Shipping (Dangerous Goods and Marine Pollutants) Regulations. European Agreement concerning the International Carriage of Dangerous Goods byRoad [ADR]
Dangerous Preparations Directive 88/379 Safety Data Sheet Directive 91/155Dangerous Substance Directive 67/548
Occupational Exposure Limits EH40 CEPE Guidance to 2001 Editions of ADR and IMDG Code. 16. OTHER INFORMATION: USER NOTES:
For specific guidance contact Ronseal Technical Services. [Helpline +44 (0) 114240 9469 ] ; Email [email protected] The product should not be used for purposes other than those shown in section 1without first referring to the supplier and obtaining written handling instructions. Asthe specific conditions of use of the product are outside the supplier's control, theuser is responsible for ensuring that the requirements of relevant legislation arecomplied with. The information contained in this safety data sheet is based on the present state ofknowledge and current national legislation. It provides guidance on health, safetyand environmental aspects of the product and should not be construed as anyguarantee of technical performance or suitability for particular applications. REVISION COMMENTS:
Revised to meet the requirements of CHIP 3 Regulations. REVISION DATE: REV. No./REPL. SDS GENERATED: SIGNATURE: DISCLAIMER:
Information contained in this Safety Data Sheet is based on data considered to beaccurate at the time of its preparation. Despite our efforts, it may not be up todate or applicable to the circumstances of any particular case. Ronseal Ltd accepts no responsibility whatsoever (except otherwise provided in
111126 - RONSEAL HIGH PERFORMANCE WOOD FILLER
law) for any damage or injury resulting from abnormal use, from any failure tofollow appropriate practices or from hazards inherent in the product. PRINTING DATE: R-PHRASES (Ful Text):
R-10 Flammable. R-20 Harmful by inhalation. R-36/38 Irritating to eyes and skin. R-2 Risk of explosion by shock, friction, fire or other sources of ignition. R-36Irritating to eyes. R-43 May cause sensitisation by skin contact.
Read entire protocol before use. E2-EASIA I. INTENDED USE The DIAsource E2-EASIA is a competitive binding immunoassay for the quantitative determination of estradiol in serum and plasma. II. GENERAL INFORMATION Proprietary name : Catalogue number : Manufactured by : DIAsource ImmunoAssays S.A. Rue du Bosquet, 2, B-1348 Louvain-la-Neuve, Belgium. For technical ass