E X E C U T I V EM u n i c h G l a s s B a t h r o o m S c a l e
PLEASE READ ALL INSTRUCTIONS BEFORE USE 2 y e a r g u a r a n t e e SPECIFICATIONS Getting Accurate Readings:
1. If the scale has not been used for a long time,
a) First, step lightly on the front corner (right or
left) of the scale first to activate the scale.
b) Second, wait for the scale to turn off. Then you
2. If the scale is moved, proceed as follows:
• Equipped with High Precision Strain Gauge
a) remove the battery from the scale for 5
Preparations Before Use
c) follow “Scale Setup” instruction (listed in
1. Insert the Lithium battery (included). See figure
1 (Note: Make sure battery is pushed all the
3. Place scale on flat hard surface. Do not use
way into its slot. Also make sure + side of
scale on carpet because the reading will be
4. If the reading appears inaccurate, please
check if the battery and the contact point are
well connected. If scale has been in use for
a long time, replace the battery and try again.
If necessary, contact the local franchisers or
Handling Tips:
4. Do not submerge scale in water. Use glass
cleaner to clean glass platform of scale.
2. Scale Setup: Place the scale on a hard flat
5. Do not leave any objects on top of scale if the
surface. Tap the front corner (right or left) of
product is not to be used during a prolonged
the scale with your foot. The digit “0” will scroll
period of time. Also remove the battery to
across the display. Then the display will show
prevent it from being depleted or leaking.
“0.0”This indicates that the scale has been
6. To avoid possible injury, do not stand on the
a) Note: This “Scale Setup” procedure applies
7. Place the scale in an area free from direct
only after installing a battery. After completing
sunlight, heating equipment, high humidity, or
“Scale Setup”, it does not need to be
performed again unless battery is removed
8. To avoid slipping, make sure your feet and
the glass platform of the scale are dry before
b) Note: If you step on the platform before “0.0”
appears, you will not obtain a reading. If this
9. Please do not strike, hit or drop objects onto
happens, step off the scale, then wait for
the glass platform, otherwise, the glass may
display to turn off, follow above steps to setup
10. Strong magnetic fields may interfere with the
operation of the scale. Avoid operating the
Scale Operation:
To measure weight, simply stand with both feet
in the center of the scale’s glass platform. Be
Usage Notes:
sure to stand erect and remain still. After 3
1. When the display shows ”Err”, it means that
seconds the display will flash your weight and
2. When the display shows ”Lo”, it means that
Note: If a weight less than 10kg is placed on the
the battery is low. Please replace the battery as
scale, the scale will not activate. To weigh
3. If scale display shows random digits or scale
something less than 10kg, activate the scale first
does not automatically shut off, proceed as
by tapping the front corner (right or left) of the
1. When no weight is on the scale for 10 seconds,
the scale will turn off automatically.
c. follow “Scale Setup” instruction (listed in
Service Centre Share Call: 086 111 5006w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a
[C’è un uomo di spalle, in piedi. Indossa l’impermeabile e il cappello. Ha appena spento la luce della sua stanza d’ufficio. Con la mano destra reg- ge una borsa marrone di pelle, voluminosa; la sinistra è appoggiata alla maniglia interna della porta che sta per aprire. (Uscito, la richiuderà dietro di sé, si avvierà verso l’ascensore, saluterà il portiere nell’atrio con un «buon
Insights on Equine Gastric Ulcer Syndrome, by Dr Olin Balch … this is a subject that I extensively investigated in the last year and wrote about with Truman Prevatt for the EN. Frankly, in the process of co-writing that article, I learned a great deal. I learned even more when I asked internal medicine specialists Gary Magdesian, Todd Holbrook, Hal Schott, Trisha Dowling, and others to review t