AMBUSH 0.5% BAIT Emergency Phone: For 24-Hour Emergency Assistance (Spill, Leak, Fire, or Exposure), Call CHEMTREC: Inside the U.S.: (800) 424-9300 Outside the U.S.: (703) 527-3887 For MEDICAL Emergency: 1. CHEMICAL IDENTIFICATION Product: AMBUSH 0.5% BAIT EPA Signal Word: EPA Registration No.: Active Ingredient:
(3-phenoxyphenyl) methyl(±)-cis, trans-3-(2,2-dichloroethenyl)-2,2-
Chemical Name: 2. COMPOSITION/INFORMATION ON INGREDIENTS NTP/IARC/OSHA INGREDIENT NAME OSHA – PEL ACGIH – TLV CARCINOGEN Permethrin (0.5%) Amyl Acetate
CAS# 628-63-7*No ACGIH TLV or OSHA PEL is assigned to this mixture. Our supplier has established an employee exposure standard of 10mg/ m3 8-hour TWA for Permethrin. 3. HAZARDS IDENTIFICATION Physical Properties Appearance: Symptoms of Acute Exposure
No toxicity information is available on this specific preparation. This health hazard assessment is based oninformation that is available on the properties of its components. Medical Conditions Likely to be Aggravated by Exposure Primary Routes of Exposure
Harmful if it comes into contact with eyes or skin. Hazardous Decomposition Products
Combustion products include carbon dioxide, carbon monoxide, sulfur oxides, halogen, halogen acids, andpossible trace amounts of carbonyl halide
Unusual Fire, Explosion, and Reactivity Hazards Emergency Telephone: (520) 783-3803 4. FIRST AID MEASURES
If poisoning is suspected, immediately contact a physician, the nearest hospital, or the nearest Poison Control Center. Tellthe person contacted the complete product name, and the type and amount of exposure. Describe any symptoms andfollow the advice given. Ingestion:
This material is classified as "practically nontoxic" by ingestion. Inhalation:
No toxic effects are known to be associated with inhalation of dust from this material. Eye Contact:
Flush with plenty of water for 15 minutes. Get medical attention if irritation persists. Skin Contact: Wash with plenty of soap and water. Get medical attention if irritation persists. !! IN ALL CASES OF SUSPECTED POISONING, GET MEDICAL ATTENTION IMMEDIATELY !!
For emergency MEDICAL response and hazard communication ONLY, call: Hazard Information Services at (800) 228-5635 ext. 283. 5. FIRE FIGHTING MEASURES Flashpoint (test method): Flammable Limits (% in air): Autoignition Temperature: Flammability: Appropriate Extinguishing Media
Use water fog, alcohol foam, carbon dioxide, dry chemical, halogenated agents. Fire Fighting Guidance
Wear self-contained breathing apparatus (SCBA) and protective clothing. Unusual Fire, Explosion, and Reactivity Hazards 6. ACCIDENTAL RELEASE MEASURES In Case of Spills or Leaks
Wear eye and respiratory protection during cleanup. Keep out of sewers and drains. Sweep up and recover or mixmaterial with moist absorbent and shovel into waste container. 7. HANDLING AND STORAGE Precautions in handling and storing
Mix as needed. Do not store diluted material. Keep container closed when not in use. Do not store near food orfeed. In case of spill on floor or paved surfaces, sweep up and remove to chemical waste area. Do notcontaminate water, food, or feed by storage or disposal. Open dumping is prohibited. Do not reuse emptycontainer. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls
This product is intended for use outdoors where engineering controls are not necessary. If use conditions aredifferent (e.g. product formulation or packaging), use ventilation adequate to maintain safe levels. Personal Protection Eye/Face
Eye contact with the material should be avoided through the use of protectiveeyewear. Skin Protection
Skin contact should be prevented through the use of long-sleeved shirt and longpants, waterproof gloves, shoes plus socks. When mixing, loading or cleaningequipment wear a chemical-resistant apron. Remove contaminated clothing andwash before re-wearing. Wash separately from other laundry. Respiratory Protection
Not required; use normal safety precautions. Emergency Telephone: (520) 783-3803 8. EXPOSURE CONTROLS/PERSONAL PROTECTION (continued) Other/General Protection An adequate supply of clean potable water should be available to allow thorough
flushing of skin and eyes in event of contact with this compound. Followmanufacturer's instructions for cleaning/maintaining personal protective equipment(PPE). If no such instructions, use detergent and hot water. Keep and wash PPEseparately from other laundry. User Safety Recommendations:
Users should wash hands before eating, drinking, chewing gum, using tobacco orusing the toilet. Remove clothing immediately if pesticide gets inside. Then washthoroughly and put on clean clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Melting Point: Boiling Point: Specific Gravity/ Density: Solubility in H20 Permethrin (0.5%) Vapor Pressure Permethrin (0.5%) STABILITY AND REACTIVITY Stability: Hazardous Polymerization: Decomposition Products:
Combustion products include carbon dioxide, carbon monoxide, sulfur oxides, halogen, halogenacids, and possible trace amounts of carbonyl halide
Hazardous Mixtures:
Combustion products: carbon dioxide, carbon monoxide, sulfur monoxide, sulfur oxides, halogen,halogen acids, possible trace amounts of carbonyl halide
Conditions To Avoid: TOXICOLOGICAL INFORMATION Acute Toxicity/Irritation Studies Ingestion:
This material is classified as "practically nontoxic" by ingestion. Inhalation:
No toxic effects are known to be associated with inhalation of dust from this material. Eye Contact:
No other adverse clinical effects have been associated with exposures to this material. Skin Contact:
No irritation is likely to develop following contact with human skin. Skin exposures maycause a skin condition called paresthesia, which is usually described as tingling, itching,burning, prickling, glowing, flushing, numbness or a chapped feeling. Symptoms usuallyoccur around the face (mouth and eyes) but may involve the arms or hands. Symptomsmay develop shortly after exposure or can be delayed up to four hours and can persistbetween 2 and 30 hours following contact. There is no evidence of any long-term orcumulative effects on the skin. The effect may result from transferring the material to theface from contaminated gloves and hands. Emergency Telephone: (520) 783-3803 TOXICOLOGICAL INFORMATION (continued) Mutagenic Potential Permethrin (0.5%): Reproductive Hazard Potential Permethrin (0.5%): Chronic/Subchronic Toxicity Studies Permethrin (0.5%): Carcinogenic Potential Other Toxicity Information ECOLOGICAL INFORMATION Summary of Effects Permethrin (0.5%)
This product is extremely toxic to fish and aquatic invertebrates. Do not apply directly to water, to areas wheresurface water is present or to intertidal areas below the mean high water mark. Do not apply when weatherconditions favor drift from treated areas. May be hazardous to aquatic organisms in neighboring areas. Do notapply this product or contaminate water when disposing of equipment wash waters. Other Environmental Information Use Precautions
This product is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do notapply this product or allow it to drift to blooming crops or weeds if bees are visiting the treatment area. DISPOSAL CONSIDERATION Pesticide Disposal
This material is extremely toxic to fish and aquatic invertebrates. Do not contaminate waterways, lakes, streams,ponds, etc. by cleaning of equipment or by disposal of waste. Dispose of waste on site or at an approved wastedisposal facility. Open dumping is prohibited. Discarded product is not a hazardous waste under RCRA, 40 CFR261. For information concerning the proper disposal of pesticide-related wastes, contact your State EnvironmentalDepartment, State Department of Agriculture, or the Regional Office of the Environmental Protection Agency foryou area. Container Disposal
Completely empty bag into application equipment. Then dispose of empty bag in a sanitary landfill or byincineration or, if allowed by State and local authorities, by burning. If burned, stay out of smoke. TRANSPORT INFORMATION DOT Classification International Maritime Organization International Civil Aviation Organization Emergency Telephone: (520) 783-3803 REGULATORY INFORMATION SARA Title III Classification Proposition 65 CERCLA Reportable Quantity (RQ) RCRA Classification TSCA Status OTHER INFORMATION NFPA Hazard Ratings Flammability: Reactivity: Notice: The information and recommendations contained herein are provided in good faith and are based upon data believed to be correct. However, no guarantee or warranty of any kind, expressed or implied, is made with respect to the information herein. Prepared By: Revision Date: Printing Date:
Ambush® is a registered trademark of Zeneca, Inc. Emergency Telephone: (520) 783-3803
ASOCIACIÓN SINDICAL DE PROFESORES UNIVERSITARIOS ASPU Personería Jurídica No.0623 del 4 de Mayo de 1966 del Ministerio de Trabajo SECCIONAL UNIVERSDIDAD DE PAMPLONA – ASPU U. de P. COMUNICADO A LA OPINIÓN PÚBLICA La Asociación Sindical de Profesores Universitarios ASPU seccional Universidad de Pamplona, rechaza y denuncia los atropellos y persecuciones a través de actos
G E R A L D W R I G H T : : A R T D I R E C T I O N212.754.5922 ½ C: 917.312.7334 ½ [email protected] ½ geraldwright.com ½ geraldwrightdesign.com FREELANCE (AUGUST 2006-PRESENT) Art Supervisor Clients: DDB, DraftFCB Healthcare, GSW, KPR, Medicus, Sudler & Hennessey ½ Developed launch materials for dermal filler Evolence ½ Created global launch materials for MS drug Avonex ½ Dev